What you are booking
We identify the appliances and flues included, the property and the person responsible for it before confirming the visit. A flat with one boiler and a home with a boiler, hob and gas fire have different scopes and pricing factors. Include disconnected, unused or difficult-to-reach appliances so their status can be assessed rather than omitted.
The attending Gas Safe registered engineer must hold the appropriate qualifications for the equipment being checked. Their identity and relevant work categories can be verified on the Gas Safe ID card. We establish unusual or commercial equipment at enquiry so it receives the correct booking and does not arrive under an unsuitable domestic scope.
Landlord timing and record responsibilities
For relevant rented residential accommodation, landlords must arrange an annual safety check of the gas appliances and flues they provide. HSE says the resulting record must be kept for at least two years, supplied to existing tenants within 28 days and given to new tenants before they move in.
Maintenance is an additional responsibility. A safety check records the condition at the inspection; it does not remove the need to maintain the installation or act on subsequent faults. Where a managing agent handles appointments, specify who arranges checks, retains records and sends them to tenants. Use the linked HSE guidance for the full responsibilities and exceptions.
A boiler service is a separate task
A service follows the appliance manufacturer’s maintenance requirements and assesses its condition and operation as part of that work. A landlord gas safety check has a different purpose. You may arrange both during one visit, but the booking should explicitly include both, with the appliances and expected records clearly identified.
If the boiler is already failing, tell us the symptoms when booking. A fault investigation, replacement part or return visit may be needed in addition to the inspection or service. Requesting a certificate does not make a leaking or unreliable appliance a routine paperwork job. Share error codes and service history without removing covers to investigate.
Prepare tenant access and appliance information
Confirm the address, flat number, tenant contact and any entry system arrangements. The engineer needs safe access to the relevant appliances, meter and flue routes or inspection points as applicable. Tell us about high-level equipment, locked cupboards or building management restrictions before the appointment.
Provide the previous safety record and appliance details if available. Tenants should know which visit is booked and the expected access arrangements. If access is declined, keep a record of reasonable attempts and follow an appropriate lawful process; do not force entry simply because an inspection is due. Book early enough to address access problems before the deadline.
- List gas appliances and their locations.
- Supply the previous record and known faults.
- Arrange tenant access and a working contact number.
- Identify the landlord or agent who will receive the record and approve work.
If the inspection identifies a problem
The result depends on the installation found. Nobody should promise a clean record before the check. If an unsafe situation is identified, the engineer explains the finding and the action needed. Treat instructions about use or isolation seriously, and do not restore an appliance that has been taken out of service without the required professional work.
A remedial quotation should identify the affected appliance or component and distinguish urgent safety action from wider recommendations. Ask what must happen before it can be used again and what documentation will follow. Keep the original findings and completion records together so the history remains clear for future checks and changes of agent.
Domestic records and commercial gas work
A residential landlord record is not a universal certificate for every building. Commercial kitchens, workplace heating and specialist gas equipment can involve different scopes and competence categories. HSE’s employer guidance deals with workplace gas safety; simply ordering a domestic CP12 is not enough to define a catering or plantroom inspection.
For mixed-use premises, describe the residential and business areas separately. Include the type of equipment and any existing service contract or inspection requirement. We will clarify the requested work before attendance so an engineer is not asked to assess an unspecified commercial installation under a domestic booking.
Arrange a London gas safety check
Send the postcode, number and type of appliances, due date and tenant access details. Say whether you also want a boiler service or assessment of a known fault. That information allows the visit to be scoped and priced around the actual work.
Our service covers all London boroughs and locations inside the M25, with 10 active vans and 24/7 availability. Planned inspection slots and any follow-up repairs are agreed individually. If there is a suspected gas escape, use the emergency procedure below instead of waiting for a routine certificate appointment.
If you smell gas, a carbon monoxide alarm sounds or you suspect carbon monoxide, leave the property and call the National Gas Emergency Service on 0800 111 999 from outside. Avoid flames and electrical switches. Seek urgent medical advice if someone may have been exposed; call 999 for severe symptoms such as difficulty breathing, confusion or loss of consciousness. Do not investigate gas fittings yourself.
Common questions
Can a service invoice replace the gas safety record?
No. Ask for the specific inspection and record you need. If servicing and the safety check are arranged together, confirm both are included rather than relying on the wording of a general invoice.
Can I book for several rented properties?
Yes. Provide a separate address, appliance list, deadline and access contact for each property. Grouped scheduling still depends on tenant access and the scope at each address.
Can an inspection guarantee no future faults?
No. It records the inspection findings. Report later changes, smells, unusual operation or faults promptly and follow professional advice about whether the appliance can remain in use.
Sources and further reading
Useful guides for this service
Explore all maintenance, landlords and reports guides →Need help with this in London?
Emergency repairs, investigations and planned installations across London and inside the M25. Tell us what you need so we can agree the next step.
Discuss your job