Skip to content
10 active vans · 24/7 · London & the M25
ResidentialCommon faults
Get in touch
Book an engineer

London-wide plumbing & heating

24/7 burst pipe repair in London

Isolate and repair a split or failed water pipe, then check the surrounding pipework and explain any access or drying work left to complete.

  • Identify and isolate the failed run
  • Replace the damaged section
  • Test the repaired water supply
Pipe connections exposed beneath floorboards
Emergency Repairs London work archive
10 active vans24/7 emergency responseAll London boroughs · Inside the M25

£5 million public liability insurance Gas work carried out by Gas Safe registered engineers. About our company →

Let’s get your job moving.

Tell us where you are and whether you need urgent help or a planned visit.

The work we handle

Burst pipe? Close the inside stopcock if you can do so safely, then call us: Loyal Plumbers repairs burst pipes 24/7 across London and inside the M25, with a £60 call-out. We establish isolation, locate the damaged pipe and agree the repair, from replacing a split section to renewing a failed connection. The job includes checking the adjoining pipework and controlled testing before the affected supply returns to use.

Identify and isolate the failed run

Establish the affected water service and a safe way to stop the escape before opening up or repair.

Replace the damaged section

Cut out or repair the failed pipe and connections as appropriate, accounting for pipe condition and accessible working space.

Test the repaired water supply

Restore supply when safe and inspect the new joints and nearby accessible pipework for further leakage.

A clear route for your property.

Different faults and projects need different work. These are the main options for this service.

Get a burst pipe repaired
A single accessible split
A local pipe replacement may resolve the leak where adjacent material and connections remain sound.
A concealed or deteriorated run
Opening-up or a longer replacement may be needed where the split is hidden or surrounding pipe has also weakened.

From first enquiry to the next step

  1. Describe the escape and isolation

    Tell us where water is appearing and whether a safe, known stopcock has stopped it.

  2. Expose the damage and agree repair

    We examine the failed section and discuss the access and replacement required.

  3. Restore supply and check

    We inspect under normal supply conditions and explain drying and reinstatement needs separately.

Agree the rates and scope before work starts. £60 call-out. Hourly rate agreed before we attend. For installations and larger work, the proposal sets out the agreed scope and price.

How our pricing works

Service details & practical advice

The work explained, answers to common questions and related services.

Split pipes, damaged connections and concealed bursts

We repair damaged water-supply and heating pipes following splits, failed joints, accidental drilling or other physical damage. First we identify the affected system and establish how to isolate it. A mains supply, stored-water connection and heating circuit can continue to release water in different ways; the nearest valve is not automatically the correct control.

Where the split is exposed, we assess the damaged section and surrounding material directly. Water appearing beneath a floor or through a ceiling needs tracing before opening a repair access point. We agree that access and distinguish immediate containment from permanent repair. If an initial temporary measure is needed, we explain what remains to complete and any restrictions on using the system.

Safe containment while the repair is arranged

Keep people away from water near electrics and unstable wet ceilings. If a familiar inside stop valve is safely accessible and turns normally, closing it may limit an incoming-water escape. Do not force it. Thames Water’s guidance explains how this control works; stored water and heating circuits may continue to leak after the mains is off.

Do not wrap a live damaged pipe and assume the result is reliable, or start cutting out the split before upstream isolation is established. Electrical Safety First advises against touching wet electrical equipment or a wet fuse box. Seek emergency assistance for immediate danger; a plumbing appointment should not delay that response.

Renewing the damaged pipe or fitting

Once the system is safely isolated, we assess the failed pipe and adjoining material, then replace the damaged section or renew the defective connection as agreed. The material and joining method must suit the existing system, its operating conditions and the surrounding pipe. A local failure does not automatically require replacement of an otherwise sound complete run.

Where corrosion, movement or damage extends beyond the visible split, we explain the evidence for a larger repair and the access it needs. We also consider support and protection at the repaired location. This avoids placing a new connection immediately beside visibly deteriorated material or leaving the same physical cause ready to damage the repair.

Accidental damage, freezing and repeated failure

Tell us whether the leak followed drilling, flooring work, an impact or a period of cold weather. That history affects the inspection. If the pipe was struck during building work, its route and protection need consideration before the area is closed again. Other nearby services may also need assessment by the relevant trade.

Where cold exposure is suspected, the repair discussion should consider the vulnerable location and appropriate protection afterwards. Do not use a naked flame or improvised electrical equipment to thaw a pipe. If repeated failures appear in the same area, ask whether movement, support or the condition of the whole run needs investigation rather than another identical local repair.

Floors, fitted units and managed-building access

An open cupboard connection and a pipe inside a tiled floor involve different access work. Tell us about floor coverings, fixed cabinets, stairs and any access panels. We agree the proposed opening and how the area will be left, including any finishing that is outside the plumbing repair.

In flats, a shared riser or supply may need managing-agent coordination and notice to other occupants. Commercial sites should identify a keyholder, isolation permissions and facilities affected by shutdown. Reliable authorisation matters before cutting into a pipe that may serve another unit. Provide drawings or previous repair notes if they exist.

Testing and restoring the service

After the repair, restoring water is a controlled part of the work. The new connections need checking and the affected system must be returned to its appropriate operating condition. For heating pipe repairs, this can involve more than simply reopening the incoming main. Ask what was tested and whether any further work remains.

Stopping the source does not establish that a wet floor, ceiling or electrical installation is ready for normal use. Drying and restoration may follow under a separate agreed scope. Keep the repair details and photographs where available; if insurance is involved, the insurer determines cover and documentation requirements.

Request a burst pipe repair

Use the enquiry form with your postcode, the pipe location and whether water is still escaping. Mention any safely taken photographs; we can arrange email sharing. Say whether the supply has been isolated, whether another flat is affected and who can authorise access.

Loyal Plumbers has 10 active vans and provides a 24/7 service throughout London and the M25. We confirm attendance for the actual circumstances. For a planned replacement of deteriorated pipework, describe the repair history so we can distinguish urgent stabilisation from a larger project.

Common questions

Will a patch be the permanent repair?

That depends on the method, pipe and condition. Any temporary measure should be described as temporary, with its limitations and the permanent work still required made clear.

Does every burst pipe need a whole new run?

No. Local replacement can be suitable where the surrounding material is sound. Widespread deterioration, repeated failure or inaccessible damaged sections can justify a wider proposal.

Can you restore the room afterwards?

Discuss drying, access reinstatement and the desired finish when agreeing the work. Plumbing repair, making good and final decoration are separate elements and must not be assumed to be included.

Sources and further reading

Useful guides for this service

Explore all emergencies and water leaks guides →

Need help with this in London?

Emergency repairs, investigations and planned installations across London and inside the M25. Tell us what you need so we can agree the next step.

Discuss your job